Gauge for Measuring Coating Thickness

Description

• Designed for non‐invasive coating thickness measurements
• Features zero or two point calibration, user adjustable high/low alarms, and a USB interface to further analyse results in the included software
• Automatically detects ferrous and non-ferrous substrates
• Easy-to-read colour LCD display
• 360° screen rotation allows users to view measured readings from any angle
• Durable gauge and probe construction
• Single or multi-point mode allows a user to set tolerances and quickly identify whether a coating passes or fails
• Tri-colour LEDs quickly indicate when measurements are below (red), above (yellow), or within set parameters (green)
• Internal memory stores up to 500 groups of data
• View stored data, charts or real-time measurement with software
• Low battery indication and auto shut off
• Includes: (1) Coating thickness gauge, (1) Ferrous substrate, (1) Non-ferrous substrate, (5) Reference films, (1) USB cable, (1) Wrist strap, (1) Sensor cover, (2) AA batteries, (1) Hard carrying case
• Display Type: Digital
• Measuring Range: 0 – 1250 µm (0.1 – 49.2mil)
• Manufacturer Part Number: R7800
• Accuracy: 0 to 1250 μm (±3% +1 μm), 0 to 49.21 mil (±3% +0.04 mil)
• Resolution: 0 to 99.9 μm (0.1 μm), 100 to 1250 μm (1 μm), 0 to 4.99 mil (0.01 mil), 5.0 to 49.2 mil (0.1 mil)
• Measurement Modes: Single & Continuous
• Minimum Curvature Radius: 5 mm (196.85 mil)
• Minimum Substrate Thickness: 5 mm (196.85 mil)
• Certification: CE
• Refresh Rate: 0.5 Seconds on Continuous Mode
• Dimensions: 5.9″ x 2.6″ x 1.38″ (152 mm x 65 mm x 35 mm)
• Weight: 6.35 oz.